Anonymizer Total Net Shield™ v2.09

Internet Explorer Setup Please Note: Click Here for steps to run the Configuration Wizard, the recommended way to switch browsers between showing your real IP address and the Total Net Shield IP address.

Configuring Internet Explorer™, Google Chrome ™, and Safari™ Browsers for Total Net Shield

Step 1Top ↑

Open the Internet Explorer browser. Go to “Tools” and Click on “Internet Options” (You can also use Internet Options from the Control Panel)

Step 2Top ↑

Select the “Connections” tab

Step 3Top ↑

For any connections listed in the box under “Dial-Up and Virtual Private Network” Settings

  • Double click on the entry
  • Ensure that the only box checked is for the Proxy server
  • In “Address” put "localhost". For the “Port” put “8080”, click “OK”.
  • Ensure that Bypass proxy server for local addresses is not checked

Then click on “LAN” Settings

Step 4Top ↑

Ensure that the only box checked is for the Proxy server. In “Address” put "localhost". For the “Port” put “8080”.

Step 5Top ↑

Click “OK”.

IP Confirmation

Step 1Top ↑

You are now set up to browse the Internet anonymously, and can check your configuration settings at any Web site that can trace your IP address. Please access Web sites such as IP Chicken for verification. If you are being secured by Anonymizer, you will either see the IP address the same as the Name Address or the Name address will contain a different Internet Service Provider than your current Internet Service Provider. This IP address will change every 24 hours.

Step 2Top ↑

If you are not being secured, you will see your ISP information in the “Name Address” field.